상품명 | FLK Tech Professional 13 Piece Watch Press Tool Set Back Case 12 Dies의 Closer Watch Repair Tool |
---|---|
판매가 | KRW 39,140 |
소비자가 | |
제조사 | 자체제작 |
적립금 | 1% |
배송비 | 무료 |
상품코드 | P000EEEC |
Brand | FLK Tech |
QR코드 |
구매방법 | |
---|---|
배송주기 |
배송 | |
---|---|
수량 |
![]() ![]() |
상품 정보 | 가격 | 삭제 |
---|
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
구매하기
FLK Tech Professional 13 Piece Watch Press Tool Set Back Case Closer Watch Repair Tool with 12 Dies
B075S9CZPY
Easy & quick to fix watch: only several steps - choose two suitable dies, screw them on the press tool, and then press down the handle.Steps to use: 1.Find a die that is larger than the glass surface. 2.Find a die smaller than the glass surface. 3.The big die is below, the small die is on the top. 4.Install the two dies you choose on the watch press. 5.Adjust your watch to a good position,, then place the cover up on the watch press. 6.Gently press the handle to close the watch back cover.
시계를 쉽고 빠르게 고칠 수 있습니다 : 몇 가지 단계 만 - 두 개의 적절한 다이를 선택하고 프레스 도구에 나사로 고정 한 다음 핸들을 누릅니다.사용 단계 : 1.유리 표면보다 큰 다이를 찾으십시오. 2.유리 표면보다 작은 다이를 찾아라. 3.큰 다이는 아래에, 작은 다이는 위에 있다. 4.당신이 선택한 두 개의 다이를 워치 프레스에 설치한다. 5.시계를 좋은 위치에 맞춘 다음 덮개를 시계 프레스에 올려 놓으십시오. 6.손잡이를 부드럽게 눌러 시계 뒷면 덮개를 닫습니다.
Comes with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm.
50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm를 허용하는 12개의 다이가 있다.
Reminders:1) Before using this tool to close the watch back cover, you must choose the most suitable dies.2)It is better to pad a cleaning cloth under the watch for protection while closing the watch back cover.3)Place the watch on the bottom die and make sure it is in the correct position before closing the watch back cover. 4)Please read the instructions or use tutorial in the product's page carefully before use.
알림:1) 이 도구를 사용하여 시계 뒷면 커버를 닫기 전에 가장 적합한 다이를 선택해야 합니다.2) 시계 뒷면 커버를 닫는 동안 보호를 위해 시계 아래에 청소 천을 덧대는 것이 좋습니다.3) 시계를 하단 다이에 놓고 시계 뒷면 커버를 닫기 전에 시계가 올바른 위치에 있는지 확인하십시오. 4) 사용하기 전에 지침을 읽거나 제품 페이지의 튜토리얼을주의 깊게 사용하십시오.
High quality compression spring, longer service life,Ideal watch press for closing snap back type watch-cases
고품질 압축 스프링, 더 긴 서비스 수명, 스냅 백 타입 시계 케이스를 닫기 위한 이상적인 시계 프레스
ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch.Bonus cleaning cloth for padding under your watch while press to protect your watch well.
ABS 플라스틱은 중간에 금속 나사가 있어 내구성이 뛰어나며 시계를 긁지 않습니다.시계 아래에 패딩을 위한 보너스 클리닝 천은 시계를 잘 보호하기 위해 누릅니다.
FLK Tech Professional 13 Piece Watch Press Tool Set Back Case Closer Watch Case Closer with 12 Dies
FLK Tech new watch back press tools set with 12 dies 18mm to 50mm.brand new and high quality.
Professional and precision watch repair tool kit set is great for starting watch repair.
This watch repair tools help you get your watch problem done at home instead of going for watch repair shops
Steps to use:
Step 1: choose one die bigger than the watch surface and install it on the top of the machine.
Step 2: choose another die smaller than the rear cover, install on the bottom of press machine.
Step 3: put the watch on the bottom die, make sure it is on the right position.
Step 4: gently push the handle bar.
Step 5: you should put table cloth mat, so that can protect your watch.
Tips:
1.Please make sure your watch back cover is press-type one, the tool is not suitable for screw or spiral type cover.
2.Please check your watch diameter before buying. The tool is only suitable for diameter <50mm
3. To prevent the watch glass to be broken, please choose a die bigger than watch glass and smaller than back cover as the lower die.
4. For the watches with butterfly clasp watch strap, please remove the strap firstly then to use the tool to press to prevent unsteadiness of the watch when pressing.
스프링 바 도구 시계 밴드 도구 세트 시계 손목 밴드 스트랩 제거 수리 키트와 3 여분의 팁 핀 amp 무거운 의무 316 스테인레스 스틸 핀
KRW 19,830
KRW 19,830
BYNIIUR 시계 링크 제거 도구 키트 시계 밴드 스트랩 핀 제거 시계 도구 키트 링크 제거 도구 시계 조정 도구 밴드 교체 스프링 바 도구 세트
KRW 24,450
KRW 24,450
시계 밴드 링크 제거 도구 키트 전문 시계 핀 제거 및 밴드 교체를위한 스프링 바 플라이어 도구 키트 무거운 의무 알루미늄 및 6 스페어 포크
KRW 61,500
KRW 61,500
Richard Mille Watch Crown Rubber Ring RM010 RM011 RM035 RM055 Rubber Sheath의 탑워치 부품 교체
KRW 102,800
KRW 102,800
시계 링크 제거 공구 스테인레스 스틸 워치 밴드 스트랩 링크 핀 3pcs 교체 핀이 있는 리무버 수리 공구 키트 시계 밴드 조정용 시계 팔찌 크기 조정
KRW 16,300
KRW 16,300
10L0L 유니버설 미니 드릴 프레스 DIY 크래프트 쥬얼리 목공 조각 모델 제작 수리 테이블 벤치 시계 케이스 리무버 홀더베이스 용 바이스 클램프
KRW 27,520
KRW 27,520
Bergeon 7767-F Watch Spring Bar Tool - Fine Tool End에서 교체 가능한 나사가 있는 긴 스테인리스 스틸 핸들
KRW 58,310
KRW 58,310
VEVOR 벤치 워치 오프너 5700 스크류 오이스터 스타일 워치 케이스 오프너 및 시계 제작 및 수리에 적합한 클로저용 워치 케이스 백 오프너
KRW 303,980
KRW 303,980
Bergeon 55-685 6899-AT-140 스페어 블레이드 워치 리페어 키트가 장착된 스테인리스 스틸 인체공학 1.4mm 스크류드라이버
KRW 56,340
KRW 56,340
LEATHERMAN TREAD LT와 호환되는 링크 워치 어댑터 - 스테인리스 스틸(Lug size 20mm Stainless Steel TREAD LT)
KRW 101,360
KRW 101,360
38피스 시계 링크 제거 공구 시계 밴드 팔찌 스트랩 조절기 시계 밴드 팔찌 스트랩 체인 링크 핀 교체 핀으로 시계 스트랩 조정 천 핀 펀치 핀
KRW 35,870
KRW 35,870
Bergeon 5700 Watch Back Opener for Waterproof Watches Watchmaker 벤치 메탈 회전 전문 수리 도구 키트
KRW 325,310
KRW 325,310
유니벨 시계 수리 공구 워치 메이커 수리 공구 키트 시계 베젤 링 오프너 제거 공구 전문 수리 액세서리 세트 시계 수리 부품 백 케이스 커버 오프너 제거
KRW 216,020
KRW 216,020
시계 수리 키트 Hovico 147 PCS 시계 수리 도구 전문 스프링 바 도구 세트 시계 수리 도구 키트 시계 밴드 링크 핀 도구 세트 휴대 케이스와 함께
KRW 37,410
KRW 37,410
Alucy 3pcs Watch Hand Pressers 손목시계 수리 공구 푸셔 피팅 세트 시계 수리 공구 키트 Watchmakers Watch Worker
KRW 30,500
KRW 30,500