1 | 3 | 2 |
Classic Thin Taper Mold 1- Height 9.4 in Width 0.47 in - 30 ft. of Wick Included as a Gift - Plastic Candle Molds for Making Candles
B01KJ3VEUM
PLASTIC CANDLE MOLD: The mold is made of very durable, high resistant plastic. It can withstand high and low temperatures and was engineered to perfection for our customers.
플라스틱 캔들 몰드: 이 몰드는 매우 내구성이 강하고 내성이 강한 플라스틱으로 만들어졌다. 그것은 높은 온도와 낮은 온도를 견딜 수 있고 우리의 고객들을 위해 완벽하게 설계되었다.
SOLID CONSTRUCTION: The candle mold is made with two parts that can be separated. It is made so for the candle to be conveniently taken out when it is properly cooled after the pouring process.
견고한 구조 : 양초 몰드는 분리 할 수있는 두 부분으로 만들어집니다. 양초를 붓는 과정을 거쳐 적절히 식히면 편리하게 꺼낼 수 있도록 만들어졌다.
CANDLE MAKING PROCESS: Paraffin, wax, beeswax, soy wax, can be poured into this mold. Please make sure to follow the instructions on pouring temperatures and ways to take out the candle.
캔들 제작 과정: 파라핀, 왁스, 밀랍, 콩 왁스를 이 틀에 부을 수 있다. 부은 온도와 촛불을 꺼낼 수있는 방법에 대한 지침을 따르십시오.
CANDLE MOLD SIZE: Mold size is 9.4 in, and the width is 0.47 in. This mold adds a different look to all the other molds that we have and which you can choose from at our store here on Amazon.
CANDLE MOLD SIZE : 금형 크기는 9.4 in이고 너비는 0.47 in입니다. 이 곰팡이는 우리가 가지고 있고 아마존에있는 우리 가게에서 선택할 수있는 다른 모든 곰팡이와 다른 모습을 더합니다.
GUARANTEE AND ASSURANCE: The mold is made for candle making and is of high quality. But if there is a problem with it, we can exchange it for a different one, or reimburse the money, no questions asked.
보증 및 보증 : 금형은 양초 제조를 위해 만들어졌으며 고품질입니다. 그러나 문제가 있으면 다른 것으로 교환하거나, 아무런 질문도 받지 않고 돈을 변제할 수 있다.
We have a wide variety of molds for the manufacturing of candles. With their help, you can easily create both traditional and original products with unique design.
These candle molds of caprolon engineering offered here are suitable for casting wax, paraffin, and other bases. The material is resistant to high and low temperatures, so the form does not crack or split in service. Caprolon can be in contact with paraffin additives and acidic environments without any harm. Due to durability of caprolon, the candle molds can be used unlimited number of times.
Important to know:1.Why is the surface porous? The pores on the surface may be formed because of low pouring temperature (below 140 °F degrees), as well as poor wax quality.
2. Why is there no gloss on the surface? The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the pouring temperatures recommended for the candle base used, as this may cause leakage of the candle mass and difficulty when pulling the candle out of the mold. Make sure you also do not exceed the maximum temperature allowed for molds (176 °F), since they may be deformed.
3. Why is a well formed? Candle mass expands when heated and decreases during solidification, so after its melting and gradual cooling there is a well that is formed in the center of the candle.
4. Why is the candle removed from the mold with difficulty? At high temperature of the wax there is an increase of the grip, the higher the temperature, the more cohesion is created and therefore it is more difficult to get the finished candle out of the mold. To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed the maximum allowed for the candle base you are using.