6.6ft



COLICOLY Female XLR to Dual 1 4 inch TS Mono Y Splitter Microphone Cable XLR Female to Dual 6.35mm TS Plug Audio Converter Adapter Cord - 6.6ft


B082GZFWY4



【Function Design】XLR Female to Dual 1/4 TS Mono Male Plug Y Splitter Cable, this cable would be to allow you to output from a mixer console's XLR male output jack, and connect into the 1/4" jack inputs on a separate device, it splits a mono XLR signal into two separate mono 1/4 lines. (Note: Not left and right channels, XLR PIN 2 is connected to the Tip of the 1/4 plug , XLR PIN 1 & 3 are connected to the Sleeve of the 1/4 plug (earthed).
{Function Design}XLR Female to Dual 1/4 TS Mono Male Plug Y Splitter Cable,이 케이블은 믹서 콘솔의 XLR 남성 출력 잭에서 출력하고 별도의 장치에서 1/4 "잭 입력에 연결할 수 있도록합니다. 모노 XLR 신호를 두 개의 별도 모노 1/4 라인으로 분리합니다. (참고 : 왼쪽 및 오른쪽 채널이 아닌 XLR PIN 2는 1/4 플러그의 끝 부분에 연결되고 XLR PIN 1 및 3은 1/4 플러그의 슬리브에 연결됩니다 (earthed).



【High Purity OFC Conductor】20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity.great choice for music lover.
•High Purity OFC Conductor®20 AWG 4N Oxygen Free Copper with Shielding은 높은 충실도의 음질을 보장하고 최대의 전도성과 신호 선명도를 제공합니다.



【Excellent Sound】With Heavy Duty 24K gold-plated XLR and 6.35mm connectors,it could eliminate signal loss and static noise,provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality. The XLR connectors are color coded Black(Left Channel) and Red(Right Channel), It splits closer to the XLR ends, the distance to the split point is about 19.7 inches(50 cm).
{Excellent Sound} Heavy Duty 24K 금도금 XLR 및 6.35mm 커넥터를 사용하면 신호 손실 및 정적 노이즈를 제거하고 내구성을 제공하며 신호 전송을 향상시킬 수 있으며 구리 쉘은 음질 손실을 방지하는 간섭을 차단합니다. XLR 커넥터는 Black(Left Channel)과 Red(Right Channel)로 컬러 코딩되어 있으며, XLR 끝에 더 가깝게 분할되며, 분할 지점까지의 거리는 약 19.7인치(50cm)이다.



【Durability】Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm(0.24 inch),Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and durable.
• 내구성 • 무거운 의무 유연한 고무 및 나일론 브레이드 재킷은 당신의 케이블을 보호합니다, 케이블의 외경은 6.0mm (0.24 인치), 최고 품질이며 친환경 재료로 만들어진 폴리에틸렌 절연은 고주파 응답, 강하고 유연하며 내구성을 향상시킵니다.



【SUPERIOR FLEXIBLITY】 Despite multiple layers of shielding and insulation put in place for maximum noise isolation, this cable's construction remains very flexible, doesn't get tangled, and is easy to coil at the end of your gig.It comes with a re-usable velcro strap to keep it organized and tight when not in use.
{SUPERIOR FLEXIBLITY} 최대의 소음 차단을 위해 여러 층의 차폐 및 단열재를 설치했음에도 불구하고, 이 케이블의 구조는 매우 유연하고 엉키지 않으며, 공연이 끝날 때 코일링하기 쉽다.사용하지 않을 때는 조직적이고 단단하게 유지하기 위해 재사용 가능한 벨크로 스트랩이 함께 제공된다.



Size:6.6ft

3 Pin XLR Female to Dual 1/4" TS Cable Adapter
This Y-cable is designed to connect an XLR mono output to two 1/4" mono inputs, It is ideal for assigning the signal from a microphone to two channels on a mixing console.

★Premium Material & Quality

- Heavy duty components.
- High Grade Oxygen Free Copper (OFC) for effective EMI and RFI rejection and flexibility.
- Durable and flexible PVC outer sleeve.
- Inside aluminum foil shielding layer to reduce interference, for a better fidelity effect.
- Gold Plated Reinforced Male Plug Delivers Preimum Quality Sound with Minnimal Interferance.
- Step-down design of 3.5mm connector allows for connection to recessed camera mic ports.
- Low-Loss 98.5% Copper Braided Spiral-Wound Shield provides maximum cancellation of hum and noise.
- 4N Oxygen-free copper conductors are encased in bare copper braid shielding to provide pure sound that is noise free.

★Specifications

- Connector A: 2 X 1/4 TS Mono Connector
- Connector B: 3 Pin XLR Female Connector
- Cable Conductors: Bare Copper
- Connector Contacts: Gold-plated
- Braid Shielding: 98.5% Coverage
- Jacket Material: PVC
- Cable Gauge: 20 AWG
- Cable Body Outside Diameter: 6.0mm