Candle Molds for Candle Making Plastic Pillar Candle Making Kit Ball Sphere Mold Large Cylinder Rib Candle Making Molds DIY Candle Making Supplies Set of 3 PCS
B07K45Y4JJ
Package Include: 1 pillar candle mold + 1 cylinder rib candle mold + 1 sphere candle mold
패키지 포함 : 1 개의 기둥 촛불 + 1 개의 리브 촛불 + 1 구형 촛불 곰팡이
Duarable PC Candle Mold: The plastic candle mold is made of high quality pc material. It can withstand frequent usage due to its resistance to high and low temperatures.
이중 PC 캔들 몰드 : 플라스틱 양초 몰드는 고품질의 PC 재료로 제조됩니다.
Recommanded Wax Pouring Temperatures: 140°F - 167 °F degrees. Temperatures of over 167 °F degrees may cause leakage of the candle mass and difficulty in pulling out the candle from the mold.
권장 왁스 주입 온도 : 140 ° F - 167 ° F.
The Pillar Mold Size: 5x12cm (1.9x4.7inch). Wax Needed: 185g. The Cylinder Rib Mold Size: 5x10cm(1.9x3.9inch). Wax Needed: 160g. The Sphere Mold Size: 7.5x7.5cm(2.9x2.9inch). Wax Needed: 190g.
기둥 곰팡이 크기 : 5x12cm (1.9x4.7 인치). 왁스 필요 : 185g.
Perfect DIY Candle Making Mold: Perfect molds for DIY candle making. It's also a great gift for friends and your kids who are interested in handmade craftworks. Tips: To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed 167 °F degrees.
완벽한 DIY 캔들 제작 곰팡이 : DIY 촛불 제작을 위한 완벽한 곰팡이.
Product Name:ESA Supplies Candle Molds For Candle Making Plastic Pillar Candle Making Kit Ball Sphere Mold Large Cylinder Rib Candle Making Molds Set of 3 PCS
Tips For Candle Making
1. The surface can be porous due to low pouring temperature (below 140 °F degrees), or because of the poor wax quality. Make sure to follow the recommended wax temperature before pouring.
2. The gloss on the surface may not be formed because of the higher pouring temperature than the recommended one. The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the fill in temperatures of over 167 °F degrees as this may cause leakage of the candle mass and difficulty in pulling out the candle from the mold.
3. It is normal if a well is formed after the product is finished. Candle mass expands when heated and decreases during solidification, so after its melting and gradual cooling, there is a well that is formed in the center of the candle.
4. The candle is removed from the mold with difficulty sometimes. It happens if the wax is heated to high temperatures, when there is an increase in the grip. The higher the temperature, the more cohesion is created and therefore it is more difficult to get the finished candle out of the mold. To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed 167 °F degrees.