Candle Molds for Candle Making Plastic Pillar Candle Making Kit Large Cylinder Rib Candle Making Molds DIY Candle Making Supplies Set of 2 PCS
B07PP4BJR6
Package Include: 2 x pillar candle molds in different sizes.
패키지 포함: 다른 크기의 2 x 기둥 촛불 몰드.
Duarable PC Candle Mold: The plastic candle mold is made of high quality pc material. It can withstand frequent usage due to its resistance to high and low temperatures.
Duarable PC 양초 금형 : 플라스틱 양초 금형은 고품질의 PC 재질로 만들어졌습니다. 고온과 저온에 대한 저항성으로 잦은 사용에도 견딜 수 있다.
Recommanded Wax Pouring Temperatures: 140°F - 167 °F degrees. Temperatures of over 167 °F degrees may cause leakage of the candle mass and difficulty in pulling out the candle from the mold.
권장되는 왁스 주입 온도: 140°F - 167°F. 167 ° F 이상의 온도는 양초 덩어리의 누출 및 금형에서 양초를 꺼내는 데 어려움을 초래할 수 있습니다.
The Pillar Mold Size: One is 5.9*2.3 inch(H*D) and another is 3.1*2.7 inch(H*D).
주형 크기 : 하나는 5.9 * 2.3 인치 (H * D)이고 다른 하나는 3.1 * 2.7 인치 (H * D)입니다.
Perfect DIY Candle Making Mold: Perfect molds for DIY candle making. It's also a great gift for friends and your kids who are interested in handmade craftworks. Tips: To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed 167 °F degrees.
완벽한 DIY 양초 만들기 몰드 : DIY 양초 만들기를위한 완벽한 몰드. 수제 공예품에 관심이 많은 친구들과 아이들에게도 좋은 선물이다. 팁 : 제거의 어려움을 피하기 위해, 금형은 주입하기 전에 윤활해야하며 온도는 167 ° F를 초과해서는 안됩니다.
Product Name:ESA Supplies Candle Molds For Candle Making Plastic Pillar Candle Making Kit Large Cylinder Rib Candle Making Molds DIY Candle Making Supplies Set of 2 PCS
Tips For Candle Making
1. The surface can be porous due to low pouring temperature (below 140 °F degrees), or because of the poor wax quality. Make sure to follow the recommended wax temperature before pouring.
2. The gloss on the surface may not be formed because of the higher pouring temperature than the recommended one. The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the fill in temperatures of over 167 °F degrees as this may cause leakage of the candle mass and difficulty in pulling out the candle from the mold.
3. It is normal if a well is formed after the product is finished. Candle mass expands when heated and decreases during solidification, so after its melting and gradual cooling, there is a well that is formed in the center of the candle.
4. The candle is removed from the mold with difficulty sometimes. It happens if the wax is heated to high temperatures, when there is an increase in the grip. The higher the temperature, the more cohesion is created and therefore it is more difficult to get the finished candle out of the mold. To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed 167 °F degrees.