24mm |
SWISS REIMAGINED Quick Release Spring Bar with Cylindrical Push Button for Watch Band (Set of Two) - 1.8mm Diameter
B010D08I82
PREMIUM SPRING BARS FOR ATTACHING WATCH BAND WITH YOUR CASE OR BUCKLE - the Spring Bar Body is Manufactured from 316L Stainless Steel and the Spring is Manufactured in Tempered 304 Stainless Steel
케이스 또는 버클을 사용하여 워치 밴드를 부착하기 위한 프리미엄 스프링 바 - 스프링 바 몸체는 316L 스테인리스 스틸로 제조되고 스프링은 304 스테인리스 스틸로 제조됨
EXACT AND SECURED FIT - These Spring Bars are 1.8mm in Diameter at Their Widest Point and Designed to Fit a Watch or Buckle Where the Measurement Between the Band Attachment Lugs is 24mm - This Will Ensure Sufficient Tension In The Spring To Hold Your Watch Band to Your Watch Securely
정확하고 안전한 적합성 -이 스프링 바는 가장 넓은 지점에서 직경이 1.8mm이며 밴드 부착 러그 사이의 측정치가 24mm 인 시계 또는 버클에 맞도록 설계되었습니다.
ATTACH/DETACH WITH EASE - Specialized for Quick Release Spring Bar Pins - Can Only Be Used With Specifically Designed Watch Bands - Ensure Your Strap Is Suitable For These Spring Bars
빠른 릴리스 스프링 바 핀을 전문으로하는 ATTACH / DETACH - 특별히 설계된 시계 밴드에서만 사용할 수 있습니다 -이 스프링 바에 적합한 스트랩을 확보하십시오
PRECISE MEASRUEMENTS - The Pin Ends are 0.8mm in Diameter and Provided They are Installed Correctly Will be Locked In Place Between the Watch Lugs or Buckle Lugs with Approximately 4.4 Newtons or 1 Pound of Force Through the Tension in The Spring
정확한 측정 - 핀 끝은 직경이 0.8mm이며 올바르게 설치된 경우 스프링의 장력을 통해 약 4.4 뉴턴 또는 1 파운드의 힘으로 시계 러그 또는 버클 러그 사이에 고정됩니다.
VARIOUS SIZES TO CHOOSE FROM - Cylindrical Push Button Lever at One End for Easy Installation and Removal of your Watch Bands - Not Sure of the Size You Need - The Lug Measurement Tool by SWISS REIMAGINED (ASIN:B00RT0D32Q) Will Provide The Answer
다양한 크기에서 선택 - 한 쪽 끝에있는 원통형 푸시 버튼 레버를 사용하여 워치 밴드를 쉽게 설치하고 제거 할 수 있습니다 - 필요한 크기를 확신 할 수 없음 - SWISS REIMAGINED (ASIN : B00RT0D32Q)의 러그 측정 도구
Most prevalent on smart watches these quick release spring bars must be used with bands specifically designed so the push button lever on the spring bar protrudes through a gap in the strap.
This is a critical component for keeping your watch on your wrist and we take special care in the design and manufacture of all our spring bars. These quick release spring bars by SWISS REIMAGINED are made specifically for us to exacting standards, the body and spring loaded ends are manufactured in marine grade 316L Stainless Steel which will ensure they will not corrode under the most extreme environments. The internal spring is manufactured from spring tempered 304 stainless steel which is durable, strong and corrosion resistant. The body of the spring bar is extruded (avoid folded spring bars, they are much weaker and can be identified by a seam on the side of the spring bar) which delivers maximum strength and the spring loaded ends are inserted into the body and held in place by crimping both ends of the body. One of the spring loaded ends is attached to the push button lever which, when depressed, ensures the installation and removal of the pin is a simple and smooth process. The body of these spring bars are 1.8mm in diameter (the thickest point) and designed to fit a watch where the measurement between the band attachment lugs is 22mm, finally the pin end diameter is 0.8mm. Our spring bars when in place and held by the tension of the spring, are locked into the watch lugs with approximately 4.4 Newtons (0.45kg of force or 1 pound force). Please ensure you purchase the correct size by measuring precisely, ideally with the Lug Measurement Tool by SWISS REIMAGINED (ASIN:B00RT0D32Q), to verify the correct size required before ordering.