Wheel Gauge for Pine Derby Wood Cars
B0818HJ6S3
Wheel Diameter – Accurately and quickly verifies compliance with a 1.170 inch and 1.180 inch wheel diameter specification. Just gently attempt to slide the gauge over the wheel. If the gauge will not slide over the wheel, then the wheel complies with the specification. If the wheel almost fits into the gauge, try again at a different spot on the wheel.
휠 직경 • 1.170 인치 및 1.180 인치 휠 직경 사양을 정확하고 신속하게 준수하는지 확인합니다. 게이지를 바퀴 위로 부드럽게 밀어보십시오. 게이지가 휠 위로 미끄러지지 않으면 휠이 사양을 준수합니다. 휠이 게이지에 거의 맞으면 휠의 다른 지점에서 다시 시도하십시오.
No Wheel Modification Allowed – If the wheels may not be sanded or modified in any way, then use the 1.180 OD gauge and the .360 width gauge.
휠 수정이 허용되지 않음 | 휠을 샌딩하거나 어떤 식으로든 수정할 수 없는 경우 1.180 OD 게이지와 .360 너비 게이지를 사용하십시오.
Wheel Modification Allowed – If the wheels may be sanded or lathed, then use the 1.170 OD gauge and the .320 width gauge unless otherwise stated by your packs rules.
휠 수정 허용 ⁇ 휠을 샌딩하거나 래딩할 수 있는 경우 팩 규칙에 별도로 명시되지 않는 한 1.170 OD 게이지와 .320 너비 게이지를 사용하십시오.
Made of cast acrylic to bring the costs down. Laser cut and engraved for smooth sanded finish.
비용을 절감하기 위해 주조 아크릴로 만들어졌다. 매끄러운 샌딩 마감을 위해 레이저 절단 및 조각.
Comes with paper affixed to plastic to reduce premature scratches. You may leave on or remove. I like it on to be honest.
조기 긁힘을 줄이기 위해 플라스틱에 부착된 종이와 함께 온다. 켜두거나 제거해도 좋다. 솔직히 말하는 게 좋아요.
Our Wheel Go/No-go gauge will help you improve your race by providing a consistent and quick way to inspect derby wheels while the wheels are mounted on the car. Inspection is a breeze once you understand how to use this tool and there will be no arguing about caliper bias.
The proper way is to simply “wand” the Derby Wheel Gauge over a wheel. If the wheel is smaller than the selected diameter, the wheel will pass through without issues. If the wheel does not pass through then that means the wheel is LARGER than the selected diameters. When you try and force the tool on the wheel, weight reduced wheels have enough “give / flex” in them to actually be squeezed inside measurement thus making them fail the inspection. Improper use of the tool is why the wheel failed, not because the wheel failed.