MECCANIXITY 3mm to 4mm Inner Dia Rotatable Universal Joint Shaft Coupling L23 x D9 with Screws and Wrench for RC Model Pack of 5
B09KXT3J7B
Shaft fitting accessories to connect two different shafts and make them rotate together to transmit torque. Applied for RC model car, RC model boat, 3D printers, snow blowers, grinders and other DIY projects
샤프트 피팅 액세서리를 사용하여 서로 다른 두 개의 샤프트를 연결하고 함께 회전하여 토크를 전달합니다. RC 모델 자동차, RC 모델 보트, 3D 프린터, 스노우 블로어, 그라인더 및 기타 DIY 프로젝트에 적용
Color: Silver Tone; Outer Dia.: 9mm/0.35inch; Inner Dia: 4mm x 4mm/0.16inch x0.16inch; Length: 23mm/ 0.91inch; Fastening Screws: M3*0.5
색상 : 실버 톤; 외부 디아. : 9mm / 0.35inch; 내부 디아 : 4mm x 4mm / 0.16inch x0.16inch; 길이 : 23mm / 0.91inch; 고정 나사 : M3 * 0.5
The universal joint is made of 45# steel and with electroplated finish, sturdy and durable. Features with large transmission torque, high efficiency, stable transmission, small gap impact
유니버설 조인트는 45 # 강철로 만들어졌으며 전기 도금 마감 처리되어 견고하고 내구성이 있습니다. 큰 전달 토크, 높은 효율, 안정적인 전달, 작은 갭 충격을 가진 특징
When you installing it, firstly install the two halves of the coupling on the two connected shafts respectively, then align, move and adjust the shaft to the correct place
그것을 설치할 때, 먼저 연결된 두 축에 커플 링의 두 반쪽을 각각 설치 한 다음 샤프트를 올바른 위치로 정렬, 이동 및 조정하십시오.
In order to give full play to its function, please start the installation within the maximum allowable eccentricity range
기능을 완벽하게 재생하려면 최대 허용 편심 범위 내에서 설치를 시작하십시오.
What is this?
Shaft fitting accessories to connect two different shafts and make them rotate together to transmit torque. Applied for RC model car, RC model boat, 3D printers, snow blowers, grinders and other DIY projects.
What will I get?
Color: Silver Tone
Material: 45# Steel
Surface Finish: Electroplated
Section: One
Size: 23mm x 9mm/0.91inch x 0.35inch (L*D)
3mm to 4mm(0.12inch to 0.16inch)
Package Contents: 5 x Universal Joints, 1 x Wrench, M3*0.5 Fastening Screws
Is there any advantages of the product?
Made of 45# steel and with electroplated finish, the universal joint is sturdy and durable.
Features with large transmission torque, high efficiency, stable transmission, small gap impact. Especially under the correct technical control conditions, it can access long lasting use.
How to use it ?
When you installing it, firstly install the two halves of the coupling on the two connected shafts respectively, then align, move and adjust the shaft to the correct place.
What should I notice?
In order to give full play to its function, please start the installation within the maximum allowable eccentricity range.