상품상세 정보

뒤로가기

자체브랜드

  •  

클래식 얇은 테이퍼 몰드 1- 너비 0.47 in - 30 ft. 선물로 포함된 윅의 높이 9.4 - 캔들 제작을 위한 플라스틱 캔들 몰드

상품 정보
상품명 클래식 얇은 테이퍼 몰드 1- 너비 0.47 in - 30 ft. 선물로 포함된 윅의 높이 9.4 - 캔들 제작을 위한 플라스틱 캔들 몰드
판매가 KRW 49,900
소비자가 KRW 54,300
제조사 자체제작
적립금 1%
배송비 무료
상품코드 P0000VVE
Brand Candle Shop
QR코드
qrcode
이미지로 저장코드URL 복사트위터로 보내기
구매방법
배송주기
상품 옵션
배송
옵션

수량
down up  
상품 목록
상품 정보 가격 삭제
총상품금액(수량) 0

할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.

이벤트 온오프버튼  

구매하기

 

1

3

2



Classic Thin Taper Mold 1- Height 9.4 in Width 0.47 in - 30 ft. of Wick Included as a Gift - Plastic Candle Molds for Making Candles


B01KJ3VEUM



PLASTIC CANDLE MOLD: The mold is made of very durable, high resistant plastic. It can withstand high and low temperatures and was engineered to perfection for our customers.
플라스틱 캔들 몰드: 이 몰드는 매우 내구성이 강하고 내성이 강한 플라스틱으로 만들어졌다. 그것은 높은 온도와 낮은 온도를 견딜 수 있고 우리의 고객들을 위해 완벽하게 설계되었다.



SOLID CONSTRUCTION: The candle mold is made with two parts that can be separated. It is made so for the candle to be conveniently taken out when it is properly cooled after the pouring process.
견고한 구조 : 양초 몰드는 분리 할 수있는 두 부분으로 만들어집니다. 양초를 붓는 과정을 거쳐 적절히 식히면 편리하게 꺼낼 수 있도록 만들어졌다.



CANDLE MAKING PROCESS: Paraffin, wax, beeswax, soy wax, can be poured into this mold. Please make sure to follow the instructions on pouring temperatures and ways to take out the candle.
캔들 제작 과정: 파라핀, 왁스, 밀랍, 콩 왁스를 이 틀에 부을 수 있다. 부은 온도와 촛불을 꺼낼 수있는 방법에 대한 지침을 따르십시오.



CANDLE MOLD SIZE: Mold size is 9.4 in, and the width is 0.47 in. This mold adds a different look to all the other molds that we have and which you can choose from at our store here on Amazon.
CANDLE MOLD SIZE : 금형 크기는 9.4 in이고 너비는 0.47 in입니다. 이 곰팡이는 우리가 가지고 있고 아마존에있는 우리 가게에서 선택할 수있는 다른 모든 곰팡이와 다른 모습을 더합니다.



GUARANTEE AND ASSURANCE: The mold is made for candle making and is of high quality. But if there is a problem with it, we can exchange it for a different one, or reimburse the money, no questions asked.
보증 및 보증 : 금형은 양초 제조를 위해 만들어졌으며 고품질입니다. 그러나 문제가 있으면 다른 것으로 교환하거나, 아무런 질문도 받지 않고 돈을 변제할 수 있다.



Size:1

We have a wide variety of molds for the manufacturing of candles. With their help, you can easily create both traditional and original products with unique design.

These candle molds of caprolon engineering offered here are suitable for casting wax, paraffin, and other bases. The material is resistant to high and low temperatures, so the form does not crack or split in service. Caprolon can be in contact with paraffin additives and acidic environments without any harm. Due to durability of caprolon, the candle molds can be used unlimited number of times.

Important to know:

1.Why is the surface porous? The pores on the surface may be formed because of low pouring temperature (below 140 °F degrees), as well as poor wax quality.

2. Why is there no gloss on the surface? The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the pouring temperatures recommended for the candle base used, as this may cause leakage of the candle mass and difficulty when pulling the candle out of the mold. Make sure you also do not exceed the maximum temperature allowed for molds (176 °F), since they may be deformed.

3. Why is a well formed? Candle mass expands when heated and decreases during solidification, so after its melting and gradual cooling there is a well that is formed in the center of the candle.

4. Why is the candle removed from the mold with difficulty? At high temperature of the wax there is an increase of the grip, the higher the temperature, the more cohesion is created and therefore it is more difficult to get the finished candle out of the mold. To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed the maximum allowed for the candle base you are using.



 
상품결제정보
배송 안내
  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 무료
  • 배송 기간 : 10일 ~ 21일
  • 배송 안내 :
교환/반품 안내
[교환 및 A/S]
1. 해외배송상품의 경우 재고를 국내에 보유하고 있지 않아 일체의 AS 및 교환서비스가 불가능합니다.
2. 교환을 위해서는 반품처리 후 재구매로 진행됩니다.
3. 저희는 구매대행업체로써 고객님의 구매와 배송부분을 대신하고 있는 서비스업체입니다. AS는 대행드릴 수 없는 점 양지 바랍니다.
4. 본상품은 해외구매대행 상품으로 교환 환불의 절차가 복잡하고 많은 비용과 시간이 소요될 수 있습니다. 신중한 구매 부탁드립니다.

5. 제품의 버전업으로 인해 일부 내용이 변경될 수 있습니다. 하자가 아닌 일부 변경은 무상 반품사유가 되지 않습니다.

[취소 및 반품]
1. 빠른 배송을 위해 주문과 동시에 현지에서 주문이 생성됩니다. 주문 후 1시간이내 무료 주문취소가 가능합니다.
2. 반품은 수령일 포함하여 7일이내 신청가능합니다.
3. 오배송이거나 초기불량의 경우 100% 환불이 가능합니다.
4. 아래 사항의 경우 유상반품 가능합니다.
    - 단순변심
    - 색상, 사이즈변경
5. 반품 신청없이 배송된 건에 대해서는 반송처리 되오니 유의해 주세요.
6. 해외상품은 현지 내수용으로 한국과 전압이 맞지 않을 수 있습니다. 이로인한 반품은 불가능합니다.
7. 박스가 훼손된 상태로 배송시 한국 배송사의 귀책이므로 수취거부 부탁드립니다.
8. 유상 반품시 반품 배송비가 발생합니다.
    - 현지 물류창고에서 반품시 : 4만원(현지 왕복배송료+물류창고 핸들링 수수료)
    - 한국도착 또는 수령 후 반품시 : 6만원
    - 부피나 무게가 큰경우 추가요금 발생시 별도 연락
9. 회수 후 검수결과 상품의 가치가 떨어진 경우 반품불가되어 고객님께 수취인 부담으로 반송됩니다.  
    - 상품자체의 비닐포장, 포장박스 훼손 또는 분실
    - 상품의 Tag, 라벨 훼손
    - 잘못된 전압사용(110V용을 220V로 사용)으로 상품내부 손상
    - 착용 잋 사용흔적이 있는 경우
    - 추가구성품 파손 또는 분실
    - 현지 검수 내용과 다른 제품이거나 고의적인 파손인 경우
    - 약간의 얼룩이나 작은 사이즈 차이
    - 모니터 해상도로 인한 색상 차이

    - 본품이 아닌 사은품 및 추가구성품에 대한 디자인과 구성이 다를경우



교환 및 반품 주소
- [16439] 경기도 수원시 팔달구 화양로38번길 133 (화서동) 1층


※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
  (색상 교환, 사이즈 교환 등 포함)
서비스문의 안내
<평일> 오전 10:00 - 12:00 오후 01:00 - 05:00 <토,일요일, 공휴일은 운영하지 않습니다. 근무시간 외 문의는 게시글로 남겨주시면 감사하겠습니다.>
판매자 정보

게시물이 없습니다

글작성 모두보기

게시물이 없습니다

글작성 모두보기