상품명 | 워치 밴드용 원통형 푸시 버튼이 있는 SWISS REIMAGINED Quick Release Spring Bar(2개 세트) - 1.8mm 직경 |
---|---|
판매가 | KRW 26,650 |
소비자가 | |
제조사 | 자체제작 |
적립금 | 1% |
배송비 | 무료 |
상품코드 | P000EFXV |
Brand | Swiss Reimagined |
QR코드 |
구매방법 | |
---|---|
배송주기 |
배송 | |
---|---|
옵션 | |
수량 |
![]() ![]() |
상품 정보 | 가격 | 삭제 |
---|
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
구매하기
24mm |
SWISS REIMAGINED Quick Release Spring Bar with Cylindrical Push Button for Watch Band (Set of Two) - 1.8mm Diameter
B010D08I82
PREMIUM SPRING BARS FOR ATTACHING WATCH BAND WITH YOUR CASE OR BUCKLE - the Spring Bar Body is Manufactured from 316L Stainless Steel and the Spring is Manufactured in Tempered 304 Stainless Steel
케이스 또는 버클을 사용하여 워치 밴드를 부착하기 위한 프리미엄 스프링 바 - 스프링 바 몸체는 316L 스테인리스 스틸로 제조되고 스프링은 304 스테인리스 스틸로 제조됨
EXACT AND SECURED FIT - These Spring Bars are 1.8mm in Diameter at Their Widest Point and Designed to Fit a Watch or Buckle Where the Measurement Between the Band Attachment Lugs is 24mm - This Will Ensure Sufficient Tension In The Spring To Hold Your Watch Band to Your Watch Securely
정확하고 안전한 적합성 -이 스프링 바는 가장 넓은 지점에서 직경이 1.8mm이며 밴드 부착 러그 사이의 측정치가 24mm 인 시계 또는 버클에 맞도록 설계되었습니다.
ATTACH/DETACH WITH EASE - Specialized for Quick Release Spring Bar Pins - Can Only Be Used With Specifically Designed Watch Bands - Ensure Your Strap Is Suitable For These Spring Bars
빠른 릴리스 스프링 바 핀을 전문으로하는 ATTACH / DETACH - 특별히 설계된 시계 밴드에서만 사용할 수 있습니다 -이 스프링 바에 적합한 스트랩을 확보하십시오
PRECISE MEASRUEMENTS - The Pin Ends are 0.8mm in Diameter and Provided They are Installed Correctly Will be Locked In Place Between the Watch Lugs or Buckle Lugs with Approximately 4.4 Newtons or 1 Pound of Force Through the Tension in The Spring
정확한 측정 - 핀 끝은 직경이 0.8mm이며 올바르게 설치된 경우 스프링의 장력을 통해 약 4.4 뉴턴 또는 1 파운드의 힘으로 시계 러그 또는 버클 러그 사이에 고정됩니다.
VARIOUS SIZES TO CHOOSE FROM - Cylindrical Push Button Lever at One End for Easy Installation and Removal of your Watch Bands - Not Sure of the Size You Need - The Lug Measurement Tool by SWISS REIMAGINED (ASIN:B00RT0D32Q) Will Provide The Answer
다양한 크기에서 선택 - 한 쪽 끝에있는 원통형 푸시 버튼 레버를 사용하여 워치 밴드를 쉽게 설치하고 제거 할 수 있습니다 - 필요한 크기를 확신 할 수 없음 - SWISS REIMAGINED (ASIN : B00RT0D32Q)의 러그 측정 도구
Most prevalent on smart watches these quick release spring bars must be used with bands specifically designed so the push button lever on the spring bar protrudes through a gap in the strap.
This is a critical component for keeping your watch on your wrist and we take special care in the design and manufacture of all our spring bars. These quick release spring bars by SWISS REIMAGINED are made specifically for us to exacting standards, the body and spring loaded ends are manufactured in marine grade 316L Stainless Steel which will ensure they will not corrode under the most extreme environments. The internal spring is manufactured from spring tempered 304 stainless steel which is durable, strong and corrosion resistant. The body of the spring bar is extruded (avoid folded spring bars, they are much weaker and can be identified by a seam on the side of the spring bar) which delivers maximum strength and the spring loaded ends are inserted into the body and held in place by crimping both ends of the body. One of the spring loaded ends is attached to the push button lever which, when depressed, ensures the installation and removal of the pin is a simple and smooth process. The body of these spring bars are 1.8mm in diameter (the thickest point) and designed to fit a watch where the measurement between the band attachment lugs is 22mm, finally the pin end diameter is 0.8mm. Our spring bars when in place and held by the tension of the spring, are locked into the watch lugs with approximately 4.4 Newtons (0.45kg of force or 1 pound force). Please ensure you purchase the correct size by measuring precisely, ideally with the Lug Measurement Tool by SWISS REIMAGINED (ASIN:B00RT0D32Q), to verify the correct size required before ordering.
스프링 바 도구 시계 밴드 도구 세트 시계 손목 밴드 스트랩 제거 수리 키트와 3 여분의 팁 핀 amp 무거운 의무 316 스테인레스 스틸 핀
KRW 19,830
KRW 19,830
BYNIIUR 시계 링크 제거 도구 키트 시계 밴드 스트랩 핀 제거 시계 도구 키트 링크 제거 도구 시계 조정 도구 밴드 교체 스프링 바 도구 세트
KRW 24,450
KRW 24,450
시계 밴드 링크 제거 도구 키트 전문 시계 핀 제거 및 밴드 교체를위한 스프링 바 플라이어 도구 키트 무거운 의무 알루미늄 및 6 스페어 포크
KRW 61,500
KRW 61,500
Richard Mille Watch Crown Rubber Ring RM010 RM011 RM035 RM055 Rubber Sheath의 탑워치 부품 교체
KRW 102,800
KRW 102,800
시계 링크 제거 공구 스테인레스 스틸 워치 밴드 스트랩 링크 핀 3pcs 교체 핀이 있는 리무버 수리 공구 키트 시계 밴드 조정용 시계 팔찌 크기 조정
KRW 16,300
KRW 16,300
10L0L 유니버설 미니 드릴 프레스 DIY 크래프트 쥬얼리 목공 조각 모델 제작 수리 테이블 벤치 시계 케이스 리무버 홀더베이스 용 바이스 클램프
KRW 27,520
KRW 27,520
Bergeon 7767-F Watch Spring Bar Tool - Fine Tool End에서 교체 가능한 나사가 있는 긴 스테인리스 스틸 핸들
KRW 58,310
KRW 58,310
VEVOR 벤치 워치 오프너 5700 스크류 오이스터 스타일 워치 케이스 오프너 및 시계 제작 및 수리에 적합한 클로저용 워치 케이스 백 오프너
KRW 303,980
KRW 303,980
Bergeon 55-685 6899-AT-140 스페어 블레이드 워치 리페어 키트가 장착된 스테인리스 스틸 인체공학 1.4mm 스크류드라이버
KRW 56,340
KRW 56,340
LEATHERMAN TREAD LT와 호환되는 링크 워치 어댑터 - 스테인리스 스틸(Lug size 20mm Stainless Steel TREAD LT)
KRW 101,360
KRW 101,360
38피스 시계 링크 제거 공구 시계 밴드 팔찌 스트랩 조절기 시계 밴드 팔찌 스트랩 체인 링크 핀 교체 핀으로 시계 스트랩 조정 천 핀 펀치 핀
KRW 35,870
KRW 35,870
Bergeon 5700 Watch Back Opener for Waterproof Watches Watchmaker 벤치 메탈 회전 전문 수리 도구 키트
KRW 325,310
KRW 325,310
유니벨 시계 수리 공구 워치 메이커 수리 공구 키트 시계 베젤 링 오프너 제거 공구 전문 수리 액세서리 세트 시계 수리 부품 백 케이스 커버 오프너 제거
KRW 216,020
KRW 216,020
시계 수리 키트 Hovico 147 PCS 시계 수리 도구 전문 스프링 바 도구 세트 시계 수리 도구 키트 시계 밴드 링크 핀 도구 세트 휴대 케이스와 함께
KRW 37,410
KRW 37,410
Alucy 3pcs Watch Hand Pressers 손목시계 수리 공구 푸셔 피팅 세트 시계 수리 공구 키트 Watchmakers Watch Worker
KRW 30,500
KRW 30,500
Crystal Front Back Case Cover Presser Closer amp 12 Dies Kit Watch Repair Tool 보기
KRW 40,680
KRW 40,680
SOONAN 시계 밴드 도구 키트 139Pcs 시계 수리 키트 링크 핀 도구 세트 리무버 수리 세트 시계 밴드 홀더 시계 끈 조정을위한 스프링 바 도구 세트
KRW 31,120
KRW 31,120
포켓워치 케이스 오프너 5700 Screw-in 방수 케이스 플렉시블 벤치 손목시계 백 리무버 시계 수리 공구 메탈베이스 12 Chucks for Watchmakers
KRW 334,460
KRW 334,460
Bergeon 8745 Professional Grade Resin Multi-Function Press Watch 사이징 도구 55-029
KRW 421,860
KRW 421,860
BARTON 시계 밴드 - 스프링 바 - 너비 선택 - 4 개의 스테인레스 스틸 시계 핀 팩 - 18 19 20 21 22 23 또는 24mm
KRW 28,210
KRW 28,210